Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

12.06.2025 20:28

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

A circuit breaker is similar, but is resettable.

But it can get overloaded, and no longer works.

At one ohm, the resistor has a maximum of 1 watt power.

BYD sells 382,476 NEVs in May, overseas sales hit new high - CnEVPost

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What does a fuse do?

what exactly is a ‘surge’ protector?

Airlines and planemakers warn that credit card legislation could end frequent-flier rewards - Business Insider

Because the load is inductive, the current lags the voltage.(by a bit).

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

In schematic diagrams this is the symbol for a fuse:

Erin Patterson tells murder trial exotic mushrooms 'have more flavour' - BBC

This is 'the assistant's answer'

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

[old diagram got deleted by accident]

This Alarming COVID Symptom Is Everywhere With The Latest Variant. We Asked Experts What You Need To Know. - buzzfeed.com

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Here is a simplified AC power diagram.

He then describes the function of a fuse.

Terraforming Mars Isn’t Sci-Fi Anymore – Here’s What It Would Take - SciTechDaily

nine

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

A fuse is a non-resetable over current circuit protector.

Can I see some saggy tit pics and huge areolas pics?

But… the neutral is now “floating” because of the 1 ohm resistance.

One

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Fixing the Phoenix Suns: Retooling the roster in 6 steps - Bright Side Of The Sun

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

a photo is worth a thousand words.

An AC voltage/ current source, and an ac inductive load.

Morning Briefing: Lindor Ties Jeter on Home Run Leaderboard - Metsmerized Online

There are three different concepts here that are getting confused.

I post the exact comment here.

He then asserts :

Most-complete Stegosaur skull ever found forces rewrite of dinosaur history - Earth.com

The third is lightning and “how it gets conducted into a home.”

He then describes Rainy Season and Lightning.

2024–10–14 [Omar Gharbi Omar Gharbi ]

Solar Storms Are Pushing Elon Musk’s Satellites Back to Earth - Gizmodo

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Upvotes:

but I think this circuit , shows a few more pieces.

How did you get to be a leftist?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

This device then solves the entire problem.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Scientists Successfully Simulate Bizarre Phenomenon Where "Light Appears to be Generated from Darkness - The Debrief

2024–10–16 [ OO OLAOYE OYEBODE ]

The MOV will conduct when the voltage exceeds 50% of line voltage.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

A hidden 'super-Earth' exoplanet is dipping in and out of its habitable zone - Space

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

The bolt then partially travels down the line to your home.

What is lightning?

but this device (an Inductor) … impedes the rapid changes in the current.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

First Sentence:

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

It seems Mohan does not understand the difference between a comment and an Answer.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

At least they know the answer if they wanted it.

These are simplified answers to the original question, and does not change anything I wrote above.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Now when you have a certain ac resistance, then a current flows in a loop.

Edit 2024–10.

So, the voltage could go up to 500 volts, and the fuse will not open up.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Barnstars:

[image of Common-mode choke]

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

This is where the MOV conducts again, and dissipated the energy.

(Dc diagram shown, AC is similar).

This one hit behind the barn.

It also is a device that limits the change in current flow.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

There are two important concepts here.

2024–10–10[John johnson John Johnson ]

the problem then depends on "how fast does the fuse operate?".

One is “what exactly is in a ‘surge protector’ ? ”

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

These devices are installed between the “hot” and “neutral” and protective ground.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

The other is “what does a “fuse” do?”

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

so, what happens?

This is where this question deviates from being a 'generic' question, and becomes more specific.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

For this case there are devices called Metal oxide varistors (MOV).

eight

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi